EN • 26
ENGLISHFRANCAISNEDERLANDSESPAÑOLITALIANODEUTSCH
664Y2800.B
MCBA PARAMETERS FOR THE SPECIALIST
Factory setting
Key Screen Description of parameters HM 35 TC HM 85 TC
STEP
Minimum number of fan revolutions [rpm]
Natural gas
Propane
STEP
Number of fan revolutions at ignition [rpm x 100]
Natural gas
Propane
STEP
CH pump over-run
0 = 10 sec. [step = 1 minute]
STEP
Domestic hot water pump over-run time
[step = 10.2 sec]
STEP
Central Heating modulation hysteresis enabled
STEP
Central Heating modulation hysteresis disabled
STEP
Domestic hot water modulation hysteresis enabled
STEP
Domestic hot water modulation hysteresis disabled
STEP
Detection of domestic hot water hysteresis enabled
STEP
Detection of domestic hot water hysteresis disabled
STEP
Central Heating blockage time
[sec. x 10,2]
STEP
Domestic hot water blockage time
[sec. x 10,2]
STEP
Domestic hot water Central Heating
blockage time [sec. x 10,2]
To Next Page
Loading...
Need help?
General
