1.2 PACK CONTENTS
Before commencing installation please check that the following
components have been supplied in the Installation Kit:
Multipoint SS Unit (x1)•
Expansion vessel 3/4” BSP male, precharge pressure 3.5bar (x1)•
Expansion vessel wall mounting bracket (x1)•
Pressure reducing valve 3.5 bar, 22mm x 22mm compression (x1) •
Single check valve 22mm x 22mm compression (x1)•
Pressure (expansion) Relief Valve 1/2”BSP x 1/2”BSP female, factory •
set at 6 bar (x1)
Tundish, 22mm x 15mm compression (x1) •
3/4” compression nuts (x2)•
Copper olive, 22mm (x2)•
Element plate tool (x1)•
Mounting brackets (x4)•
User Instructions•
Guarantee Card•
2.0 TECHNICAL SPECIFICATION
Electrical Rating 3.0kW @ 240v / 2.8kW @ 230v
Capacity 50,80 & 100 litres
Weight (100 Litre) 30Kg (empty), 130Kg (full)
Weight (80 Litre) 24Kg (empty), 104Kg (full)
Weight (50 Litre) 18Kg (empty), 68Kg (full)
Operating pressure 0.35 MPa (3.5 bar)
Rated pressure 0.6 MPa (6.0 bar)
Expansion vessel charge pressure 0.35 MPa (3.5 bar)
Expansion relief valve setting 0.6 MPa (6.0 bar)
Minimum supply pressure 0.08 MPa (0.8 bar)
Maximum supply pressure to PRV 1.6 MPa (16.0 bar)
Temperature / Pressure Relief Valve 90°C / 1.0 MPa (10.0 bar)
To Next Page
Loading...
Need help?
General
