EasyManua.ls Logo

hecht 3080 - Cleaning; Storage; Transport; Troubleshooting

hecht 3080
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15 / 22
PL
SK
EN
CS
HU
Keep the machine in good condition, if necessary change warning and instruction labels on
the machine.
For safety reasons, replace worn or damaged parts. Only use original spare parts and
accessories. Parts not tested and approved by the equipment manufacturer can cause
unforeseeable damage.
Repair and maintenance work other than described in this section, which are more
complicated, or it needs special tools, let it on our authorized service.
When frost threatens irreparable damage!
After long stoppages, make sure the rotor turns correctly by briefly switching the pump on and off.
If the pump becomes blocked, connect the pressure line to the water line. Open the water line,
Switch on the pump several times for approx 2 seconds, Most blockages can be removed in this way.
CLEANING
Note: I
Never use aggressive detergents or solvents for cleaning.
1. Carefully clean the machine after each use.
2. Wipe down the product with a slightly damp cloth or with brush.
3. Clean the cover of the machine, especially the ventilation holes.
4. Potential damage of the parts due to corrosion, can not be assessed as a manufacturing or
material defect.
STORAGE
Store the machine out of reach of children.
Turn the motor off and disconnect the mains plug if the machine is not used.
Allow let the machine to cool down before storage.
Do not store the machine a long time in direct sunlight.
Replace worn or damaged parts for safety.
Store machine in a clean, dry, dark and frost-free place, protected from dust and out of
reach of children. The ideal storage temperature is between 5 and 30°C.
Use the original packaging to storage whenever possible.
Cover unit with a suitable protective cover that does not retain moisture. Do not use sheet
plastic as a dust cover. A nonporous cover will trap moisture around the machine, promoting
rust and corrosion.
TRANSPORT
Turn the motor off and disconnect the mains plug. When transporting, be careful not to drop,
or otherwise shock the machine. For transport, the machine has to be fixed against slipping and
tipping over. Do not place objects on the machine.
TROUBLESHOOTING
CAUTION! A
You cannot rectify disorders that require more intervention yourself.
If you‘re unable to rectify the fault using the corrective measures described below,
contact a specialist garage, preferably an authorised service centre.
Improper handling can cause damage or serious injuries.

Related product manuals