38 / 48
GB
SAFETY INSTRUCTIONS
Before you put this machine into operation you have to read instructions in this manual.
• Read these instructions before initial operation. Pay special attention to the safety instructions.
• If you notice transport damage while unpacking, notify your supplier immediately. Do not
operate the machine!
• Dispose of the packing in an environmentally friendly manner. Take to a proper collecting
point.
• Keep these instructions for reference on any issues you may be uncertain about. When you
hire or sell the machine, have all documents supplied go with it.
GENERAL SAFETY INSTRUCTIONS
WARNING! When using this machine, observe the following safety instructions
to exclude the risk of personal injury or material damage. Please also observe the
special safety instructions in the respective chapters. Where applicable, follow the
legal directives or regulations for the prevention of accidents pertaining to the
use of machine.
WORK AREA
• Keep work area clean and well lit. Cluttered and dark areas invite accidents.
• Do not operate tools in explosive atmospheres, such as in the presence of flammable liquids,
gases, or dust.
• Keep children and bystanders away while operating a tool.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use common sense when operating a tool. Do not
use a power tool while you are tired or under the influence of drugs, alcohol, or medication.
A moment of inattention while operating power tools may result in serious personal injury.
• Remove any adjusting key or wrench before turning the tool on. A wrench or a key that
is left attached to a rotating part of the machine may result in personal injury or damage.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery or long hair can be caught in moving
parts.
SAFETY INSTRUCTIONS FOR INITIAL OPERATION
• The operator should read the operating manual before use.
• Never use he machine with a damaged protection facility or protection grids pr without any
protection facility mounted on.
• Stop the machine and disconnect from the supply (i.e. pulling the plug from the socket) in
the following cases:
- during breaks in working and if the device is not in use
- before performing any work on the device (cleaning, maintenance)
- if the connecting cable is damaged or entangled
- if the device is blocked
- if you want to pick up or move the device
- after striking a foreign objects and if there are any unusual noises or vibrations (inspect the
shredder for damage before restarting and operating the shredder)
• Use only spare parts and accessories delivered and recommended by the manufacturer.
Using of unoriginal components result in immediate expiration of warranty claims.
To Next Page
Loading...
