24 / 48
PL
SK
DE
EN
CS
HU
• We recommend save the package for future use. The packaging materials must still be
recycled or disposed of in compliance with the relevant legislation. Sort different parts of
the packaging according to material and hand it to the appropriate collection sites. For
further information contact your local administration.
PACKAGE CONTENTS
1x lawn mower body, 1x upper part of the handle, 2x lower part of the handle, 1x grass bag, 1x
set of fasteners, 1x manual for use
• Standard accessories are subject to change without notice.
• This product requires assembly. The product must be assembled correctly before use.
ASSEMBLY
The complete push bar, the grass catcher and the wheels must be assembled before using
the lawnmower. Follow the operating instructions step-by-step and use the pictures provided as
a visual guide to easily assemble the machine.
1. Put the metallic frame inside the grass catcher (fig. 2) - if not already assembled.
2. Fix the bag on the metallic frame (fig. 3).
3. Insert the lower handles into the holes provided in the deck (fig. 4) and firmly secure on
both sides with attached locking screws (obr. 5A).
4. Unfold the upper handle bar (fig. 6) and tighten the knobs clockwise to secure it (obr. 7A).
5. Attach the cable using the cable-clamp (fig. 8A).
MOUNTING AND DISMOUNTING THE GRASS CATCHER
1. To fit: Raise the rear cover and hitch the grass catcher on rear of mower (fig. 9).
2. To remove: grasp and lift rear cover, remove grass catcher.
STARTER HANDLE
Disconnect the spark plug boot. Press stop control handle. Pull gently the starter handle toward
the handle and put it to the rope guide (fig. 10A). Connect the spark plug boot.
BEFORE STARTING THE ENGINE
FUEL
CAUTION! A
Due to transport, the machine is supplied without engine oil and fuel. For the same
reason, some types of machines are also not filled with gear oil. Before commissioning,
fill with oil and fuel!
THE ENGINE IS CERTIFIED FOR UNLEADED PETROL
Use clean, fresh, unleaded fuel of merchantable quality.