To Next PageTo Next Page
Need help?Do you have a question about the hecht 5196 and is the answer not in the manual?
General| Type | Petrol Lawn Mower |
|---|---|
| Working width / Cutting Width | 51 cm |
| Cutting Height Range | 25 - 75 mm |
| Recommended oil | SAE 30 |
| Mulching function | Yes |
| Side discharge | Yes |
| Engine Type | 4-stroke |
| Rated power | 3.6 kW |
| Cutting Height Adjustment | Central |
| Drive | Yes |
| Wheels | Front 8", rear 11" |
| Model | Hecht 5196 |
Technical details and specifications related to the engine.
Key operational safety advice, including handling loads and passenger restrictions.
Specific limits for slope angles and side gradients to prevent machine tipping.
Critical warnings about carbon monoxide and engine heat hazards during operation.
Handling battery hazards, including chemical contact and short circuits, with caution.
Essential protective gear like eye protection, hearing protection, shoes, and gloves.
Identifies inherent risks from product construction, such as electrical, heat, and mechanical hazards.
Safe procedures for fueling the machine, including engine off and cool down requirements.
Details on recommended motor oil types and the importance of proper oil levels.
Step-by-step guide for checking and topping up engine oil levels correctly.
Essential checks to perform before operating the engine for safety and longevity.
Explanation of how safety devices prevent starting or stop the engine when requirements are not met.
Details on using the gearshift lever for forward/reverse movement and general operation.
Step-by-step guide for starting the engine and engaging controls correctly.
Instructions for moving the machine without mowing and for safe deceleration and stopping.
Guidelines for keeping the machine in good condition, cleaning, and checking fasteners.
Essential engine maintenance steps, including tilt precautions and general inspection.
Steps for draining old oil, replacing the oil filter, and pouring new oil correctly.
Guide for spark plug inspection, removal, installation, and correct electrode gapping.
Detailed steps for preparing the machine for long-term storage, including fuel and engine.
Safety warnings and procedures for transporting the machine, especially on vehicles.
Table of common problems, probable causes, and corrective actions for the machine.
Information on obtaining technical assistance, repairs, and ordering original spare parts.
