28 / 68
PL
SK
DE
EN
CS
HU
- after striking a foreign object (check the machine. If damage occurs, repair before
restarting the engine)
- if the machine starts to vibrate abnormally (check the machine. If damage occurs, repair
before restarting the engine)
- allways, when the machine is without supervision
- before refuelling;
• Use only spare parts and components, which the manufacturer delivers and
recommends. The use of non-genuine parts can damage the machine and injure
the operators.
• Failures of your machine which require larger interference must always be eliminated
by specialized workshop. Unauthorized interferences can cause damages.
WORKPLACE SAFETY
WARNING! B
Do not operate the engine in a confined space where dangerous carbon monoxide
can collect.
• Do not operate in explosive atmospheres, such as in the presence of flammable liquids,
gases, or dust. Product create sparks which may ignite the dust or fume.
• Check the terrain where you are going to use the machine, and remove any objects that
could be caught, tangled, or discarded (stones, shards of glass, nails, wires, toys, sticks, etc.).
Only operate the machine on a safe surface and only in good light!
• Never use the machine during rain and storms, especially if there is a risk of lightning strikes.
• Never use the machine on a slippery surface.
• Keep children and bystanders away while operating the machine. Distractions can cause
you to lose control.
• Beware of traffic when working near or crossing a road.
• Be careful when using the lawnmower near verges, ditches, or banks. Machine can suddenly
turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.
• Avoid operating the equipment in moist or even wet grass, where feasible. Mow only dry
grass. Too long or wet grass leads to blocking and overload the engine. To avoid stirring
up the dust, mow the grass best when it´s is dry, but the soil is still moist. Dust causes
the air filter pollution and this causes higher fuel consumption. Due to lack of maintenance
the engine can be damaged.
WORKING ON SLOPES
CAUTION! A
This machine must not be used on slopes steeper than 15° and with side gradients
above 10°. If the machine is likely to be used mostly on sloping ground, fit
counterweights beneath the cross-member of the front wheels. These improve
stability at the front and reduce the chances of tipping over.
• Do not use on slopes of more than 15° (27%) and with side gradients above 10° (18%).
Danger of injury by overturning machine.
To Next Page
Loading...
