44 / 68
PL
SK
DE
EN
CS
HU
WARNING! B
Prior to any work on the machine (maintenance, inspection, replacement of
accessories, servicing) or before storing it, ALWAYS SWITCH THE ENGINE OFF, wait
for all moving parts to stop and allow the machine to cool down. Prevent the engine
from being started accidentally. Disconnect the spark plug. Remove the ignition key
from the ignition box.
THIS WARNING IS NOT REPEATED IN ANY FOLLOWING POINTS!
Keep this recommendation about checks, maintenance and intervals stated in this users guide.
Others service operations, which are more complicated, or it needs special tools, let it on our
authorized service.
MACHINE MAINTENANCE
• Keep the machine in good condition.
• Careful handling and regular cleaning ensure that the machine remains functional and
efficient for a long time.
• In case of abnormal vibrations proceed according to instructions (see instruction for removal
of fault).
• Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.
• Always ensure that the ventilation openings are kept clear of debris.
• Replace worn or damaged parts for safety. Use only original spare parts.
• Replace safety and instruction stickers and labels with new if necessary.
ENGINE MAINTENANCE
CAUTION! A
If the motor needs to be tilted during maintenance, the fuel tank must be empty.
The spark plug must always be upwards. If the fuel tank isn‘t emptied and the motor
is tilted differently and in a different direction, then it can be difficult to start due to
the oil and petrol that clogs inappropriate parts of the motor, polluting the air filter,
the spark plug and the like.
GENERAL INSPECTION AND MAINTENANCE SCHEDULE
Operation Hours Completed (Date or Time)
MACHINE
Check of fastening and sharpeness
of blades
25
Blade replacement 100
Transmission belt check 25
Transmission belt replacement as
needed
Blade belt check 25
To Next Page
Loading...
