45 / 68
PL
SK
DE
EN
CS
HU
Operation Hours Completed (Date or Time)
Blade belt replacement as
needed
Drive adjustment and check 10
Blade brake and engagement check 10
Bolt and screw check 25
General Lubrication 25
ENGINE
Check engine oil level 8
Engine oil change 5 *
50 **
100 ***
Replace oil filter 50 **
100 ***
Clean area around muffler and
controls
8
Muffler maintenance 50
Clean air intake grille 8
Air filter cleaning and check 25
Air filter replacement Annually
Cooling System maintenance Annually
Fuel filter check 8
Fuel filter replacement Annually
Clean area around muffler and
controls
8
Spar plug replacement Annually
* After first use.
** Engine with standard black oil filter.
*** Engines with high-efficiency yellow or orange oil filter.
• The above table is there to help you maintain your machine’s safety and performance. It
shows the main maintenance and lubrication operations and their frequency. To the right of
each item, there is a box where you can write the date or after how many operating hours
the work was carried out.
• General lubrication of all joints should also be carried out whenever the machine is to be left
unused for a long period.
To Next Page
Loading...
