HEIDENHAIN TNC 640 - Page 11

Fundamentals | Control model, software and features
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
11
Spindle Synchronism (option 131)
Spindle synchronization Synchronization of milling spindle and turning spindle
Cycle 880: Gear hobbing (option 50 and option 131)
Remote Desktop Manager (option 133)
Remote operation of external
computer units
Windows on a separate computer unit
Incorporated in the control's interface
Synchronizing Functions (option 135)
Synchronization functions Real Time Coupling – RTC:
Coupling of axes
Visual Setup Control – VSC (option 136)
Camera-based monitoring of the
setup situation
Record the setup situation with a HEIDENHAIN camera system
Visual comparison of planned and actual status in the workspace
Cross Talk Compensation – CTC (option 141)
Compensation of axis couplings Determination of dynamically caused position deviation through axis
acceleration
Compensation of the TCP (Tool Center Point)
Position Adaptive Control – PAC (option 142)
Adaptive position control Changing of the control parameters depending on the position of the
axes in the working space
Changing of the control parameters depending on the speed or
acceleration of an axis
Load Adaptive Control – LAC (option 143)
Adaptive load control Automatic determination of workpiece weight and frictional forces
Changing of control parameters depending on the actual mass of the
workpiece
Active Chatter Control – ACC (option 145)
Active chatter control Fully automatic function for chatter control during machining
Active Vibration Damping – AVD (option 46)
Active vibration damping Damping of machine oscillations to improve the workpiece surface
Batch Process Manager (option 154)
Batch process manager Planning of production orders