HEIDENHAIN TNC 640 - Page 431

Programming Q Parameters | Additional functions
10
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
431
Group
name
Gruppen-
nummerID
Systemdaten-
nummer
Index Description
Read and write data of touch probes (TS, TT) (system string)
10350 74 - Serial number of the active tool touch probe
TT from CfgProbes/activeTT.
Read the data for pallet processing (system string)
1 - Pallet name.10510
2 - Path of the selected pallet table.
Read version ID of the NC software (system string)
10630 10 - This string corresponds to the format of
the version ID displayed, i.e. 340590 07 or
817601 04 SP1.
Read data of the current tool (system string)
10950 1 - Current tool name.
Example: Assign the value of the active scaling factor for the Z
axis to Q25.
55 FN 18: SYSREAD Q25 = ID210 NR4 IDX3