HEIDENHAIN TNC 640 - Page 689

Turning | Tools in turning mode (option 50)
16
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
689
Tool data in the turning tool table
Below the table window the control displays dialog text,
unit specification and input range for the specific input
field.
Input parameters Use Input
T
Tool number: Must match the tool number of the
turning tool in TOOL.T
-
NAME
Tool name: The control automatically takes on the tool
name if you select the turning tool table in the tool
table
Input range: 32 characters
max., only capital letters, no
space characters
ZL
Tool length 1 (Z direction)
–99999.9999...+99999.9999
XL
Tool length 2 (X direction)
–99999.9999...+99999.9999
YL
Tool length 3 (Y direction)
-99999.9999...+99999.9999
DZL
Delta vale of tool length 1 (Z direction) is added to ZL
–99999.9999...+99999.9999
DXL
Delta vale of tool length 2 (X direction) is added to XL
–99999.9999...+99999.9999
DYL
Delta vale of tool length 3 (Y direction) is added to YL
-99999.9999...+99999.9999
RS
Tool tip radius: The control considers the tool tip
radius in turning cycles and implements tool tip radius
compensation when contours with radius compensa-
tion RL or RR were programmed
–99999.9999...+99999.9999
DRS
Delta value for tool tip radius: Cutter radius oversize is
added to RS.
-999.9999 to +999.9999
TO
Tool orientation: Direction of tool tip
1 to 9
Angle of orientation
Spindle orientation angle: Angle of the milling spindle
for aligning the turning tool to the machining position
–360.0 to +360.0
T-ANGLE
Setting angle for roughing and finishing tools
0.0000 to +179.9999
P-ANGLE
Point angle for roughing and finishing tools
0.0000 to +179.9999
CUTLENGTH
Cutting length of recessing tool
0.0000 to +99999.9999
CUTWIDTH
Width of the recessing tool
0.0000 to +99999.9999
DCW
Oversize f. recessing tool width
-99999.9999...+99999.9999
TYPE Type of turning tool: Roughing tool ROUGH, finish-
ing tool FINISH, thread tool THREAD, recessing tool
RECESS, button tool BUTTON, groove turning tool
RECTURN
ROUGH, FINISH, THREAD,
RECESS, BUTTON, RECTURN