HEIDENHAIN TNC 640 - Page 792

Manual Operation and Setup | Camera-based monitoring of the setup situation VSC (option 136)
17
792
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
Produce live image
In the Manual operation mode, you can display and save the
current camera view as a live image.
The control does not use the image captured here for automatic
checking of the clamping situation. Images produced in this menu
may be used for documentation and traceability. For example, you
could record the current setup situation. The control saves the
image produced as a .png file in a directory of your choosing.
Procedure
Proceed as follows to save the camera’s live image:
Press the CAMERA soft key
Press the LIVE IMAGE soft key
The control displays the current camera view.
The control opens a pop-up window.
Enter the desired file name
Select the desired target directory
Press the OK soft key
The control saves the current live image.
Or press the Save button
Options in Live Image mode
The control provides the following options:
Soft key Function
Increase camera brightness
The settings made here only affect Live Image
mode. They have no influence on pictures taken in
automatic mode.
Reduce camera brightness
The settings made here only affect Live Image
mode. They have no influence on pictures taken in
automatic mode.
Configuring the field of view of the camera
Refer to your machine manual.
These settings can only be made after entering a
code number.
Go back to the previous screen