Need help?Do you have a question about the Heimplanet The Cave and is the answer not in the manual?
General| Brand | Heimplanet |
|---|---|
| Model | The Cave |
| Category | Tent |
| Language | English |
2-3 Person Tent with IGD/Geodesic Structure for enhanced stability and surface-area-to-volume ratio.
Features Multi Chamber Safety and a One-Pump System for efficient and secure inflation.
Lightweight design with a total weight of 5.2 KG for portability and ease of transport.
Self-supporting airframe inspired by diamond structure for high stability and excellent surface-area-to-volume ratio.
Allows single-step inflation and divides frame into five chambers for stability, even if parts are damaged.
Durable double-layer construction with airtight TPU bladder and extra-strong polyester fabric for stiffness and longevity.
Spread the inflatable diamond grid evenly across the ground, ensuring struts are not twisted, then partially inflate.
Spread the inner tent and connect its toggles to the black D-rings on the frame struts.
Pump up the IDG until struts are properly filled with air; the rest of the tent erection happens automatically.
Unpack, lay out flat, close all five valves, connect pump to an open valve, and inflate the tent.
Push clamps to separate beams, peg front/rear/sides with slight pressure, then apply moderate tension to anchor points.
Release clamps, open all five valves to deflate, and fold both sides towards the center axis, pushing out air.
Roll the tent tightly to remove remaining air, then place and compress it into the tent bag.
Find opening, access bladder, remove connectors, pull out bladder, patch or replace, reinsert carefully, and inflate slowly.
If the jacket is damaged, replace the entire strut immediately to prevent inner bladder damage.
To Next Page