How to cancel SUPER mode?
Press SUPER, MODE, FAN, ON/OFF or SLEEP button.
Result: The display return to the original mode. Escape from SUPER mode.
11. TIMER MODE
a. Press button.
Result: “ON 12:00” flashes on the LCD.
b. Press the TEMP ˄ or ˅ button.
Result: Once to increase or decrease the time setting by 1 minute. One and a
half seconds to increase or decrease the time setting by 10 minute. For a
longer time to increase or decrease the time by 1 hour.
c. When your desired time displayed on LCD, press the TIMER ON button and confirm
it.
Result: A "beep" can be heard. "ON" stops flashing. The TIMER indicator on the indoor
unit lights up.
d. After the set timer displayed for 5 seconds the clock will be displayed on the LCD of
the remote controller instead of set timer.
Note: SMART button is not available in SUPER
mode. ECONOMY button is not available in
SUPER mode. The appliance will continue
working in SUPER mode for 15 minutes, if you
don’t escape from it by pressing any of the
buttons mentioned above.
To Next Page
Loading...
Need help?
General
