Need help?Do you have a question about the Heinner HCD-V904B and is the answer not in the manual?
This document describes the HEINNER HCD-V904B Condenser Dryer, a household appliance designed for drying laundry.
The HEINNER HCD-V904B is a condenser tumble dryer, meaning it collects moisture from the clothes in a water tank, which needs to be emptied periodically. It offers various drying programs and auxiliary functions to cater to different fabric types and desired dryness levels. The dryer is intended for household and indoor use only, and commercial use will void the warranty.
The dryer is operated via a program selection knob and an electronic indicator with additional functions.
Users should follow instructions on laundry labels, drying only items suitable for tumble drying. It's recommended not to dry thin, multi-layer, or thick-layer fabrics together for even drying. Large items like duvets and small items should be dried separately. Delicate fabrics, embroidered fabrics, wool/silk, expensive fabrics, airtight clothes, and tulle curtains are not suitable for drying.
Before drying, all objects (lighters, matches, etc.) must be removed from pockets. Clothes should be untangled, and items with belts, laces, zips, clasps, or fasteners should be secured to prevent damage to the drum or fabrics. Metal parts should be removed. Woven goods may shrink during the first drying cycle, so a protective program is advised. Fabric softeners should be used according to the washing machine manufacturer's instructions. The dryer should not be overloaded beyond its 9 kg capacity.
The dryer offers a variety of programs, including:
The dryer should be placed on a straight and stable surface. A minimum of 3 cm space is required between the side and rear walls and the worktop if installed under a counter. Ventilation openings should not be obstructed. The dryer should not be installed in rooms with a risk of freezing. If placing on top of a washing machine, a special stacking kit and authorized service agent are required, and the washing machine must have the same or greater capacity. The total weight of stacked appliances can reach 150 kg. The appliance should be installed against a wall.
Water accumulates in a tank during drying. This tank must be emptied after each use. An optional drain hose can be connected to directly drain water outside. The hose must be securely connected and installed at a maximum height of 80 cm, without being folded or stepped on.
The dryer operates at 220-240 V, 50 Hz, and requires a 16 Ampere earthed socket. Operating at low voltage can shorten service life.
The dryer has a built-in fault detection system with flashing operation lights indicating error codes (e.g., E03 for a full water tank). Solutions for common problems like long drying times, damp laundry, and water leakage are provided, often involving cleaning filters, emptying the water tank, or checking program selection. If problems persist, an authorized service agent should be contacted.
To optimize energy efficiency, the dryer should be operated at full capacity without overloading. Laundry should be spun at the highest possible speed in the washing machine. Similar types of laundry should be dried together. Adequate clearance for air circulation should be maintained around the dryer. The door should not be opened unnecessarily during drying, and new wet laundry should not be added. Lint filters and the condenser should be cleaned regularly. The drying environment should be well-ventilated.
To Next Page
General
