Why won't my Heinner HCD-V804SB Dryer open or start the program?
If your dryer won't open or start, first ensure it's plugged in and the loading door is properly closed. Also, verify that you've set a program and haven't left it in Standby (Pause) mode. The child lock might be active, so try deactivating it.
What to do if my laundry is damp after drying in my Heinner HCD-V804SB?
If your laundry is still damp after a drying cycle in your Heinner Dryer, it could be due to several reasons. First, the selected program might not be suitable for the type of laundry you're drying, so check the care labels and select an appropriate program, potentially using time programs. Also, a clogged lint filter or condenser can cause this, so wash them. Finally, ensure you are not overloading the dryer and that your laundry is adequately spun before drying by selecting a higher spin speed on your washing machine.
What to do if the Heinner Dryer won't start?
If your Heinner Dryer won't start, there are a few things to check: ensure the dryer is properly plugged into the socket. Verify that the loading door is completely closed. Make sure you've set a program and pressed the Start/Pause button, ensuring it's not in Standby mode. Also, check if the child lock is active and deactivate it if necessary.
What to do if the Heinner HCD-V804SB Dryer programme has been interrupted?
If your Heinner Dryer program is interrupted unexpectedly, first ensure that the loading door is properly closed. If there was a power failure, press the Start/Pause key to restart the program. Also, check if the water tank is full and empty it if needed.
Why is the water tank symbol on my Heinner Dryer on?
If the water tank warning symbol is illuminated or flashing on your Heinner Dryer, it likely means the water tank is full; empty it. If your dryer is connected directly to a water outlet, ensure the water discharge hose is not bent.
Why do clothes have shrunk in my Heinner HCD-V804SB?
Clothes may shrink, felt, or deteriorate in your Heinner Dryer if the selected program is not suitable for the type of laundry you are drying. Check the care labels on your laundry items and select a program accordingly.
Why is water leaking from the loading door of my Heinner HCD-V804SB Dryer?
If water is leaking from the loading door, there might be lint accumulated on the inner surfaces of the loading door and on the surfaces of the gasket, so clean these surfaces.
What to do if the program has been interrupted for no reason on my Heinner HCD-V804SB Dryer?
If the program has been interrupted, ensure the loading door is properly closed. There might have been a power failure, so press the Start/Pause key to restart the program. Also, the water tank might be full, so empty it.
What to do if the water tank warning symbol is on/flashing on my Heinner HCD-V804SB Dryer?
If the water tank warning symbol is on or flashing, the water tank might be full, so empty it. Also, if the product is connected directly to the water outlet, the water discharge hose might be bent, so check it.
Why is the drying process taking so long on my Heinner HCD-V804SB Dryer?
The drying process might be prolonged due to several reasons. The lint filter or the condenser could be clogged, so try washing them. The ventilation grills might be closed, so open the door/windows to lower the room temperature. A layer of limescale on the humidity sensor or overloading the dryer can also cause this, so clean the sensor and avoid overloading. Also, ensure your laundry is adequately spun by selecting a higher spin speed on your washing machine.
General| Capacity | 8 kg |
|---|---|
| Display | LED |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Color | Silver |
| Special Functions | Anti-crease, Delay start |
To Next Page
