Why is water leaking from the Heinner HCD-V804SB Dryer door?
If you notice water leaking from the loading door of your Heinner Dryer, it is likely due to lint accumulation on the inner surfaces of the loading door and the gasket. Clean these surfaces to resolve the issue.
Why is the filter cleaning symbol flashing on my Heinner HCD-V804SB?
If the filter cleaning warning symbol is flashing on your Heinner Dryer, it could mean the filter seat is clogged by lint, there's an obstruction on the lint filter surface, or the condenser is clogged. Clean the filter seat, wash the filter with lukewarm water, and wash the condenser.
Why do clothes have shrunk in my Heinner HCD-V804SB?
Clothes may shrink, felt, or deteriorate in your Heinner Dryer if the selected program is not suitable for the type of laundry you are drying. Check the care labels on your laundry items and select a program accordingly.
Why is the water tank symbol on my Heinner Dryer on?
If the water tank warning symbol is illuminated or flashing on your Heinner Dryer, it likely means the water tank is full; empty it. If your dryer is connected directly to a water outlet, ensure the water discharge hose is not bent.
What to do if the Heinner HCD-V804SB Dryer programme has been interrupted?
If your Heinner Dryer program is interrupted unexpectedly, first ensure that the loading door is properly closed. If there was a power failure, press the Start/Pause key to restart the program. Also, check if the water tank is full and empty it if needed.
What to do if the Heinner Dryer won't start?
If your Heinner Dryer won't start, there are a few things to check: ensure the dryer is properly plugged into the socket. Verify that the loading door is completely closed. Make sure you've set a program and pressed the Start/Pause button, ensuring it's not in Standby mode. Also, check if the child lock is active and deactivate it if necessary.
What to do if my laundry is damp after drying in my Heinner HCD-V804SB?
If your laundry is still damp after a drying cycle in your Heinner Dryer, it could be due to several reasons. First, the selected program might not be suitable for the type of laundry you're drying, so check the care labels and select an appropriate program, potentially using time programs. Also, a clogged lint filter or condenser can cause this, so wash them. Finally, ensure you are not overloading the dryer and that your laundry is adequately spun before drying by selecting a higher spin speed on your washing machine.
General| Capacity | 8 kg |
|---|---|
| Display | LED |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Color | Silver |
| Special Functions | Anti-crease, Delay start |
To Next Page
