Heinner HCD-V704B User Manual (English)

Questions and Answers:

B
Brian MorrisAug 15, 2025
Why does the Heinner HCD-V704B take so long to dry?
- M
  Mariah RobersonAug 15, 2025
  The drying process of your Heinner Dryer might be prolonged due to several reasons. The lint filter or the condenser could be clogged, so try washing them. The ventilation grills might be closed, so open the door/windows to prevent the room temperature from rising too much. Also, the humidity sensor may have a layer of limescale, so clean it. Overloading the dryer or insufficiently spinning the laundry beforehand can also cause this issue. Avoid overloading the dryer and select a higher spin speed on your washing machine.
J
Jason JonesAug 18, 2025
What to do if the Heinner HCD-V704B filter cleaning warning symbol is flashing?
- M
  Michael FosterAug 18, 2025
  If the filter cleaning warning symbol is flashing on your Heinner Dryer, it could be due to a few reasons: the filter seat might be clogged by lint, there might be an obstruction on the surface of the lint filter, or the condenser might be clogged. To resolve this, clean the filter seat, wash the filter with lukewarm water, and wash the condenser.
L
Laura HartAug 21, 2025
What to do if Heinner HCD-V704B Dryer laundry comes out damp?
- J
  John SullivanAug 21, 2025
  If your laundry is coming out damp from your Heinner Dryer, consider that laundry that comes out hot generally feels more humid. Ensure the program you're using is suitable for the type of laundry by checking the care labels and using time programs. Also, a clogged lint filter or condenser can cause this, so wash them. Avoid overloading the dryer, and ensure your laundry is adequately spun by selecting a higher spin speed on your washing machine.
D
Dana BrownAug 25, 2025
What to do if the Heinner HCD-V704B Dryer water tank warning symbol is on?
- R
  Russell CarterAug 26, 2025
  If the water tank warning symbol is on or flashing on your Heinner Dryer, it likely means the water tank is full. Empty the water tank. If the product is connected directly to the water outlet, check the water discharge hose, because it might be bent.
E
Erica GarrisonAug 28, 2025
Why won't my Heinner HCD-V704B Dryer start?
- M
  montoyaeddieAug 28, 2025
  If your Heinner Dryer won't start, first ensure that it is properly plugged into the socket and that the loading door is completely closed. Also, make sure that you have set a program and pressed the Start/Pause key, ensuring it's not in Standby mode. Finally, check if the child lock is active and, if so, deactivate it.
T
Tammy JimenezAug 31, 2025
What to do if the Heinner HCD-V704B programme has been interrupted?
- D
  Debbie ValenciaAug 31, 2025
  If the Heinner Dryer programme has been interrupted, make sure that the loading door is properly closed. If there was a power failure, press the Start/Pause key to restart the programme. Also, the water tank might be full, so empty it.
G
Gregory LewisSep 4, 2025
Why are my clothes shrunk after using the Heinner HCD-V704B Dryer?
- D
  Deborah ShortSep 4, 2025
  If your clothes have shrunk, felted, or deteriorated after using the Heinner Dryer, the programme used might not be suitable for the type of laundry. Check the care labels on your laundry items and select a suitable programme.
A
Andrew PattonSep 7, 2025
Why is the Heinner HCD-V704B loading door opening on its own?
- J
  judyraySep 7, 2025
  If the loading door of your Heinner Dryer opens on its own, it might not be closed properly. Push the loading door until you hear the closing sound.
E
Eric YoungSep 10, 2025
Why is water leaking from the Heinner Dryer loading door?
- L
  Lindsey LopezSep 12, 2025
  If water is leaking from the loading door of your Heinner Dryer, there might be lint accumulated on the inner surfaces of the loading door and on the surfaces of the gasket. Clean these surfaces to resolve the issue.