Heinner HCD-V704B - Automatic Fault Codes

www.heinner.com 7Kg, 220-240V~50Hz
23
Your tumble dryer is equipped with a built-in fault detection system, indicated by a
combination of flashing operation lights. The most common failure codes are shown below.
ERROR CODE
SOLUTION
E03 /
Empty the water tank, if problem does not solved, contact the
nearest authorised service agent.
E04
Contact the nearest authorised service agent.
E05
Contact the nearest authorised service agent.
E06
Contact the nearest authorised service agent.
E08
There may be voltage fluctuation in mains.Wait until voltage is
appropriate for working range.
TECHNICAL SPECIFICATIONS
Brand
HEINNER
Model name
HCD-V704B
Height
Min: 845 mm / Max: 855 mm*
Width
596 mm
Depth
563mm
Capacity (max.)
7 kg
Net weight (with glass door)
37,2 kg
Voltage
220-240 V
Power
2700 W
*Min. height: Height with the adjustable feet not used. Max. height: Height with the
adjustable feet extended to the maximum.
**Dry laundry weight before washing.
IMPORTANT: To improve the quality of the dryer, technical specifications are subject
to change without prior notice.
IMPORTANT: The values declared have been obtained in a laboratory environment
according to the relevant standards. These values may change depending on the
environmental conditions and use of the dryer.
XIII. AUTOMATIC FAULTS