Fast cool function
Enter: Circulating modulation rapid cooling mode
Operate: Indicator of rapid cooling lights up and the refrigerator operates at 2°C
Exit:
1. Operate 150 min under the rapid cooling mode
2. Temperature adjustement can exit from the rapid cooling mode
Temperature control of freezing chamber
The freezing temperature is relatively low in “COLDER” position, while the freezing
temperature is relatively high in “COLD” position, thus, “NORMAL” position is generally
used.
When ambient temperature is high in summer, the temperature shall be in the range
from “NORMAL” to “COLD”. If the ambient temperature is above 35℃, then “COLD”
position shall prevail.
When ambient temperature is low in winter, the temperature shall be in the range from
“NORMAL” to “COLDER”. If the ambient temperature is below 10°C, then “COLDER”
position shall prevail.
NOISE INSIDE THE UNIT
You may notice that your unit makes some unusual noises. Most of these are perfectly
normal, but you should be aware of them!
These noises are caused by the circulation of the refrigerant liquid in the cooling system.
It has become more pronounced since the introduction of CFC free gases. This is not a
fault and will not affect the performance of your unit. This is the compressor motor
working, as it pumps the refrigerant around the system.
To Next Page
Loading...
