Spin Speed
When needed, the spinning speed can be adjusted pressing the Speed button in the following steps: 1300:
0-400-600-800-1000-1200-1300
Delay
Set the Delay function:
1. Select a program.
2.Press the Delay button to choose the time (the delay time is 0-24h).
3.Press [Start/Pause] to commence the delay operation
Cancel the Delay function: Press the [Delay] button until the display light is off.
It should be pressed before starting the program.
If the program already started, should switch off the program to reset it to a new one.
Pre-Wash
Extra washing function before the main washing cycle starts to increase the washing performance. Note:
Detergent needs to be added to compartment I.
Extra Rinse
The laundry will undergo an extra rinse after selecting this function.
Temp.
When needed, the washing temperature can be adjusted by pressing the temperature button in the
following steps: Cold - 20°C - 40°C - 60°C - 90°C.
Child Lock
This function is meant to keep children from misusing the controls.
When the Child Lock is activated, the display will alternately show “CL” and the remaining time.
Pressing any other button will cause the Child Lock indicator to flash.
When the program ends, “CL” and “END” will alternate on the display.
The Child Lock deactivates the function of all buttons except the On/Off button and the Child lock button!
Only the simultaneous pressing of the two buttons [Temp.] and [Function] can deactivate the Child Lock!
Please deactivate the Child Lock before selecting a new program!
To Next Page
Loading...
Need help?
General
