Note: Use only the new water inlet hose coming with your machine while making
water inlet connections of your machine. Never use old, used or damaged water
inlet hoses.
WATER DISCHARGE CONNECTION
The end of water discharge hose can be fitted to a specific apparatus directly attached
to dirty water discharge hole or outlet joint of the basin elbow.
Never attempt to extend the water discharge hose by jointing.
Do not put discharging hose of your machine in a vessel, bucket or sink.
Make sure that the water discharge hose does not bend, buckle, be crushed or
extended. Please note: The water drain hose should be mounted at a height maximum
100 cm from the ground.
To Next Page
Loading...
Need help?
General
