CANCELLING PROGRAMME
If you want to cancel any programme running:
Switch the programme knob to “CANCEL” position.
Your machine will stop the washing operation and the programme will be cancelled.
To get rid of the water accumulated in the machine switch the programme knob to any
programme.
Your machine will perform the necessary discharge operation and cancel the
programme.
You can run your machine by selecting a new programme.
FINISHING PROGRAMME
Your machine will stop by itself as soon as the programme you have selected finishes:
- The expression of “END” will flash on the electronic display
- You can open the machine’s door and remove the laundry.
- Leave the door of your machine open to allow the inner part of your machine to dry after
removing your laundries.
- Switch the programme knob to CANCEL position.
- Unplug your machine.
- Turn the water faucet off.
To Next Page
Loading...
