TECHNICAL SPECIFICATION CHAPTER 7
7 Specifications
7.1 Basic System
7.1.1 General Design
Battery: Built-in 12 V 2 Ah sealed Pb-gel battery
Chassis: 23 cm x 10.5 cm x 10.5 cm (L x W x H) aluminum housing
Communication: USB. Bluetooth Version 2.0 + EDR Class 2
Operating humidity range: 20 to 95% RH (avoid condensation)
Operating temperature: -5 to +40 °C
Power consumption: Basic operation 1.6 W, 8 W with all internal
light sources operated at maximum output (measuring light, red and
blue actinic light, and far red light). Saturation Pulse at maximum in-
tensity, 30 W
Recharging time: approximately 6 hours (with the PAM-2500
turned off) via Battery Charger MINI-PAM/L
Signal detection: PIN-photodiode protected by long-pass filter
(T(50%)=715 nm). Selective window amplifier
Sockets: Connector for Special Fiberoptics 2010-F. USB socket.
Sockets for Leaf Clip Holder 2030-B or Micro Quan-
tum/Temperature-Sensor 2060-M, Battery Charger MINI-PAM/L or
external 12 V battery via MINI-PAM/AK cable, and external
lamp/trigger output
Weight: 2.5 kg (including battery)
95
To Next Page
Loading...
Need help?
General
