HELIX Broadcaster 100 User Manual

Helix Broadcaster 100 Touch Screen User Guide CHAPTER 1: System Setup
7
Shell Menu Options
4. Choose from these options:
• Restore Defaults — Resets Helix Broadcaster to its factory defaults, erasing stream
confirmation information and returning the unit to its default IP address.
Tip: You can save the configuration to file and later restore it. Using the
browser interface, navigate to
System Setup > Firmware Setup > Config Backup.
• Clear Firewall — Suspends the firewall settings that have been set up using the browser
interface’s
Network Setup category under the System Setup tab.
• Reset Password — Returns the log-in password to the default value of admin.
• Calibrate Touchscreen — Displays an interactive series of prompts that allow you to
recalibrate the touch screen interface.
Browser Interface
Once Helix Broadcaster is connected to your network, you display the browser interface from
any machine on your network. Use the secure HTTP protocol (HTTPS) to access the Helix
Broadcaster IP address. For example:
https://98.111.12.114
You will be prompted to enter the administrator name and password. The defaults are:
Once you log in, you can access Helix Broadcaster functions that are organized in tabs that
appear at the top of the page.
Tabbed Functional Areas
user name admin
password admin

HELIX Broadcaster 100 Specifications

General

Brand	HELIX
Model	Broadcaster 100
Category	Touchscreen
Language	English