HELLER HPH20 User Manual

2. Select Sign up and register your mobile number or email address to obtain a verification code or select sign in if
you have already signed up to GAFSmartLife. Your verification code will be sent to your registered mobile number
or email address.
3. Enter the verification code in the message and tap “Login” to log into the App.
4. Ensure the heater is located within WIFI range and switch on via power button. The indicator light “ ” will
rapidly blink. If the indicator light does no rapidly blink, please press “ ” button for 5 seconds until you hear
“beep” sound, then go to the App, tap “add device” at the bottom, as shown in Image 1,
a) Press “+”in the top right corner, as shown in Image 1.
b) Choose “All Devices” as shown in Image 2.
c) Choose “Heater”, as shown in Image 3.
d) Press the “confirm indicator rapidly blinks” when the indicating light on device rapidly blinks, as shown
in Image 4.
e) Input password of WIFI and then confirm, as shown in Image 5.
f) Wait for the APP to connect with the device until it is connected successfully, as shown in Image 6.
Pic
Image 1 Image 2

HELLER HPH20 Specifications

General

Brand	HELLER
Model	HPH20
Category	Heater
Language	English