HELLER PCH2000T - Installation; Features

 Do not place the heater on LONG PILE CARPET OR FLOKATI RUGS. Use a heat board if
necessary.
FEATURES
PARTS
FEATURES
A
Power Switch
B
Mounting Bracket
C
Adjustable Thermostat
D
Power Indicator
E
Lockable Castors
INSTALLATION
This heater is inteded for freestanding or wall mounting. It is not to be mounted on ceiling or floors.
Choose a location where there is at least 1m clearance of either side from drapery or any other
furnishing.
INSTALLATION CAUTIONS:
 Any electrical wiring required for installation, must be carried out by a qualified licensed electrician.
 The heater must be mounted horizontally only.
 Do not mount directly below or in front of a socket outlet.