11
TROUBLESHOOTING GUIDE
If you have followed the instructions and are having difficulty operating the unit, locate
the
PROBLEM in the left column below. Check the corresponding POSSIBLE CAUSE
column to locate and fix the problem.
PROBLEM POSSIBLE CAUSE SOLUTION
No power when
ON/OFF button is on
AC adapter is not plugged
into the AC outlet.
Insert the AC adapter into the
AC outlet.
No power when
plugged in
The AC outlet may not have
power.
Check the outlet with a working
lamp or other electrical
appliance.
Master volume control is set
to minimum.
Turn up the master volume.
Volume control on TV
set/PA system is set to
minimum.
Turn up the volume of the
TV/PA system.
No sound
TV set/PA system power is
OFF.
Turn on the power at TV/PA
system.
Disc is inserted upside
down.
Insert disc correctly.
Disc is dirty. Wipe it clean with soft cloth.
Disc is scratched. Use a new disc.
Disc is warped. Use a new disc.
A non-standard disc is
inserted.
Only use discs bearing standard
logo.
Lens is dirty. Clean the optical pickup with a
CD lens cleaner.
Moisture has formed inside
the CD deck.
Wait about 20 to 30 minutes to
let it dry out.
CD PLAYER does
not work normally or
the LED displays
“ - - ” , “
E
” or “ no ”
Karaoke system needs to
be reset.
Disconnect the machine from
power source for 30 seconds.
Source Selection on your
TV home stereo is not set
properly.
Select AUX IN as the source for
your TV home stereo.
No sound - If audio is
going through TV
home stereo
Improper connection to
stereo system or PA.
Follow directions on ‘Audio
Connection’ page for
connecting to a home stereo
system.
To Next Page
Loading...
Need help?
Power
Speakers
