8
VIDEO SELECT
Set the VIDEO select to CDG.
LOADING A DISC
(1) Grip the specific points on the CD Door where indicated by a
removable label and pull gently to open it.
(2) Load a disc into the compartment with the printed side facing you.
(3) Gently close the CD DOOR. The karaoke system begins to read
the disc. The LED display will display the total number of tracks.
(4) Press PLAY/PAUSE button to play CD. (If no disc is loaded, "- -"
will be displayed).
PLAY/PAUSE MODE
(1) To start playing, press the PLAY/PAUSE button once, the first track [1] will be
displayed and the PLAY/PAUSE indicator will light. (If a CD+G disc is detected, the
CDG indicator will also turn on).
(2) To temporarily stop playing, press the PLAY/PAUSE
button, the PLAY/PAUSE
indicator will flash.
(3) To resume play, press PLAY/PAUSE
button again.
STOP MODE
If the STOP
button is pressed in the course of playing, the disc will cease to play. The
total number of tracks will be shown on the LED display.
SKIP PLAY (For both CD and CD+G discs)
(1) In stop mode, you can skip up or down to a specific track number by pressing the
forward or back SKIP / button.
(2) While the selected song track is flashing, press the PLAY/PAUSE
button.
(3) During the PLAY mode, you can skip up or down to a specific track number by
pressing the forward or back SKIP / button.
REPEAT PLAY (For CD and CD+G discs)
(1) To repeat the current track, press the REPEAT button once. The REPEAT indicator
will flash. The track will continue to play until the repeat function is turned off.
(2) To repeat all the tracks, press the REPEAT button twice, the REPEAT indicator will
light up steadily. All the tracks on the disc will be played repeatedly.
(3) To clear the repeat function, press the REPEAT button again, the REPEAT indicator
will turn off.
PROGRAM
Use this button to program and play back songs in a preselected order.
(1) Programming can be done in the stop mode only. Press the PROGRAM button, the
PROGRAM indicator will light up.
To Next Page
Loading...
Need help?
Power
Speakers
