16
During format, the LCD displays “Formatting Please Wait”.
After format, the menu is back again. In the Playback mode, LCD will show “NO IMAGE” on screen.
USB Connection
To check the available USB connection, it can be performed by following steps:
Turn on the camera, press “Mode” button and select “Configuration” Menu.
Go down to “USB Connection”, the available USB connection is indicated on LCD.
Use “Left” and “Right” key to choose between “PC Cam” and “Mass Storage” mode for USB connection.
Setting Auto Power Off
Your camera is designed to switch off automatically after 1 minutes of inactivity. You can change the Auto
power off setting by the following steps:
Turn on the camera, press “Mode” button and select “Configuration” Menu.
Go down to “Auto Power Off”, then use “Left” and “Right” key to choose “30 sec”, “1 Min”, “3 Min” or “5 Min”.
Setting Light Frequency
In order to take a better indoor picture, the camera needs to be set to suit the correct lighting frequency. Set
the frequency to 60Hz for USA and Japan, and 50 Hz for Europe and Asia.
50Hz Frequency
60Hz Frequency
To Next Page
Loading...
Need help?
General