22
down the time interval after the shutter key pushed for photo taking. The Self-timer function is only applied
to next picture. When the self-timer is activated, the camera beeps and the self-timer LED turns red and
blinks for each second during count down before the picture is taken. Please place the camera on a flat
surface or use a tripod.
Setting Time Stamp
Time Stamp can be imprinted on the picture. “Date Only” or “Date & Time” can be selected.
Turn on the camera and make sure it is in Capture mode.
Press “Menu” button and use “up”/ “down” button till the cursor on “Time Stamp” in the menu on the LCD
Screen, then use “Left” and “Right” to choose “OFF”, “Date Only” or “Date & Time”.
Time Stamp: OFF
Time Stamp: Date Only
Time Stamp: Date & Time
.
To Next Page
Loading...