HOW TO CHARGE HELO™ LX
To recharge your wellness band you need to apply
in the underlying part to the charger adapter.
You can connect to the adapter using the provided
USB cable, through which you can recharge HELO™
LX both from your PC or from a common USB
charger.
The battery lasts about 3 days and needs about
2 hours to be fully charged.
The duration of the battery depends on the use
of HELO: the calculations about the duration refer
to the use made for the scheduled measurements,
with a correct charge of the battery.
At the beginning of charging, if you do not see the
red LED on, wait a few minutes and try to turn on
HELO™ LX by pressing the button for 2 seconds.
Charge HELO™ LX until the top green LED turns on,
indicating that charging is complete.
Given the reduced charging times and to avoid
losing of nighttime measurements, charge HELO™
LX during the day.
Note: The power adaptor is not included. You can plug
the USB cable in a USB port of your computer or in a wall
power adaptor.
USER GUIDE - EN
To Next Page
Loading...
Need help?
General