15
EN
CLEANING THE MILK FROTHER
After a long-term use, some waste would be left in the Milk unit and need be cleaned. It takes about 2 min-
utes for cleaning process.
After entering the program settings, select the ‘Clean milk unit with clean
-
ing agent’ option.
Put the cleaning tablet in a cup with water. Remove the milk pipe from the
milk box/container and insert to the hole of the drip tray grid
Clean the cup and fill with fresh water. Then put in the milk pipe and
confirm.
After cleaning finished, the machine enters into ‘Program setting interface’
status.
To Next Page
Loading...
