21
EN
TRANSPORT AND RECYCLE
Transport
Please save the packaging of the coffee machine
for future transportation.
Make sure to empty water inside the machine be-
fore transportation, otherwise, it will damage the
machine
After emptying the waterway, please wipe the ma-
chine both inside and outside to dry.
Once the empty waterway program was executed,
the system will rerun to the program of “first-time
use”, when the coffee machine is used again.
While emptying the waterway, there will be a
high-temperature steam sprays from coffee spout.
Please pay special attention to avoid being scalded.
Please empty the water system in “water tank”
mode.
The machine is on the status of ‘Beverage Icons’
Enter program setting and select ‘Machine setting’ and select
‘Factory reset’.
Display “EMPTY UNIT” and press ‘OK’. Turn off the water supply
or remove water tank, then machine begins to clean up the wa
-
terway automatically .After emptying the waterway, the machine
will automatically turn off. Take the drip tray out after the power
is switched off, and clean the water in the drip tray.
To Next Page
Loading...
