20
EN
4. Assemble the milk frother and install it on
the coffee machine.
Display Cause Solution
EMPTY TRAY
If the water drip tray is full, any
function of making beverage will be
out of service.
Take the drip tray out, empty the
waste water in the drip tray and
reinstall it to the machine.
EMPTY GROUNDS
If the coffee grounds container is
full, any function of making beverage
will be out of service.
Take the coffee grounds container
out, empty the coffee grounds
container and reinstall it.
FILL WATER TANK
If water in the water tank is used up,
any function of making beverage will
be out of service.
Fill the water tank with water.
FILL BEANS
If coffee beans in the bean container
are used up, function of making
coffee will be out of service.
Add beans into bean container
INSTALL TRAY
The drip tray is not installed
correctly ; any function is out of
service.
Install the drip tray correctly.
UNIT EMPTY
The water in the pipe inside the
machine is not enough; any function
is out of service.
Press „OK’’ to confirm
ERROR CODE 1~7
The coffee machine failures, may not
be able to be used.
Power off, restarting up
If still unresolved, please pull out the
plug. Contact with customer service
center.
PRESSURE HIGH
Using dark roasted coffee beans or
over fine coffee powder;
The filter of the brewer is clogged.
Adjust grinder wheel to rougher;
Start brewer cleaning procedure
BREW UNIT ERROR Internal parts malfunction Restart coffee machine
Serial Port Failure
Communication problem between
display panel and main PCB
Restart coffee machine. If cannot
work, please contact customer
service
To Next Page
Loading...
