9
4.5.
CONNECTION TO POWER SUPPLY
Before use, clean the cabinet (see the section on maintenance and cleaning).
All earthin requirements stipulated by the the local electricity must be observed.
The connection to the power source must be made by trained and qualified service technicians.
Prior to making the connection, make sure:
• The electrical system used to power the appliance
must be suitable for rated parameters of the ap-
pliance to be installed.
• The electronic system connected to the counter
complies with applicable requirements.
• Electrical connections and installation of the
thermomagnetic circuit-breaker have been per-
formed by a qualified person.
Connection stages:
• Install the thermomagnetic circuit breaker suit-
able for rated output power of the appliance to
be installed.
• Connect the counter to the output on the
thermomagnetic circuit breaker.
• Make sure the counter is operational (signalled
by an indicator lamp).
5. HOW TO USE
5.1. PLACING PRODUCTS IN THE COOLING CHAMBER
Never stack food items on top of each other. Divide them evenly on the tray or GN container.
To Next Page
Loading...