EasyManua.ls Logo

Hendi 3500 M - Preparations before using for the first time; Suitable cooking equipment

Hendi 3500 M
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. Digital display: Display ON, OFF and power setting.
2. Turning knob: Switch ON/OFF and power setting.
Preparations before using for the first time
Remove all protective packaging and wrapping.
Check to make sure the appliance is undamaged. In case of incomplete delivery and damages. Please contact supplier (See ==
> Warranty).
Clean the appliance before use (See == > Cleaning and Maintenance).
Make sure the appliance is completely dry.
Place the appliance on a horizontal, stable and heat resist surface that is safe against water splashes.
Ensure that there is sufficient ventilation. Keep a minimum distance of 15cm around the appliance bottom of cookware
Do not place the appliance in close proximity to devices which are sensitive to disturbances by magnetic sources (e.g. radios,
tape decks).
Note: Due to manufacturing residues, the appliance may emit a slight odor in the first few cycles. This is normal and does not indicate
any defect or hazard. Make sure the appliance is well ventilated.
Suitable cooking equipment

Related product manuals