Hendi 970294 - Troubleshooting

9
NL
Troubleshooting
If the appliance does not function properly, please check the below table for the solution. If you are still
unable to solve the problem, please contact the supplier/service provider.
Problem Possible cause Solution
Appliance does not
slice evenly
Blunt blade Sharpen blade
Dirty appliance Clean the appliance
Appliance stops
slicing
Overheated motor Let the machine cool off for an extended period. The
motor’s safety thermostat will reset itself automatically.
Carriage does not
slide
Dirty slide bar Clean the slide bar and lubricate with Vaseline
Some food stick to the
blade.
Switch off the appliance & unplug it. Let it come to a
complete stop. Remove any blockage. Wipe the blade
with a damp cloth.
Blade stops when
product is being cut
v-belt worn out or dirty Contact the supplier.
When in doubt, always contact your supplier!
Circuit diagram for 970294
AC voltage input: AC220-240V 50Hz
N
L
PE
KC
KC HL
KM
ST
SQ1
SQ2
T
SB1
SB2
PE
C
M
M : Motor
T : Transformer
C : Capacitor
PE : Protective earthing (Grounding)
L : Live
N : Neutral
SB1, SB2 : Switch
KC : Relay
HL : Indicator lamp
ST : Thermal cut-out
SQ1, SQ2 : Micro switch
EN