What to do if pressure is not exhausting at end of cook cycle in Henny Penny Fryer?
If the pressure is not exhausting at the end of the cook cycle in your Henny Penny Fryer, the solenoid or exhaust line might be clogged. Turn the fryer OFF and allow it to cool to release the pressure in the frypot. Then, have all lines, the solenoid, and the exhaust tank cleaned.
Why is operating pressure too high in Henny Penny Fryer?
If the operating pressure of your Henny Penny Fryer is too high, the deadweight may be clogged. Turn the fryer OFF and allow it to cool down to release the pressure in the frypot. Clean the deadweight; see Cleaning the Deadweight Assembly Section.
General| Model | PFE-592 |
|---|---|
| Category | Commercial Food Equipment |
| Type | Pressure Fryer |
| Capacity | 14 lb (6.4 kg) food |
| Oil Capacity | 6.5 gal (24.6 L) |
| Power | 5.5 kW |
| Weight | 490 lb (222 kg) |
| Computer Controls | Yes |
| Voltage | 208V/240V |
| Phase | 3 |
To Next Page
