HEOS 1 - Swapping Left and Right Channels in a Stereo Pair

o
Swapping Left and Right Channels in a Stereo
Pair
1
Tap the “Rooms” tab.
2
Tap the Pencil e icon to enter Edit mode.
3
Tap a Stereo Pair (a room which contains two HEOS 1
speakers) to edit the group.
4
Tap on the Swap L&R switch to swap the left and right
channels of the two speakers.
5
Tap the Back arrow to return to the list of Rooms.
6
Tap the Check Mark i icon to exit Edit mode.
o
Removing a Stereo Pair
1
Tap the “Rooms” tab.
2
Tap the Pencil e icon to enter Edit mode.
3
Tap a Stereo Pair (a room which contains two HEOS 1
speakers) to edit the group.
4
Tap on the Stereo Pair switch to return the paired
speakers to two individual speakers.
5
Tap the Back arrow to return to the list of Rooms.
6
Tap the Check Mark i icon to exit Edit mode.
Contents Setup Use Troubleshooting Status LED Appendix
32