HEOS 1 - Firmware Upgrade

o
Firmware Upgrade
1
Select “Advanced”.
2
Select “Firmware Upgrade”.
3
Enable or disable automatic firmware upgrades.
4
Manually check for a firmware upgrade.
5
Select Save Settings to apply the new settings or
Cancel Settings to revert to the previous settings.
o
About
Viewing Technical Details About the HEOS device.
1
Select “Advanced”.
2
Select “About”.
3
Scroll down to see information about the speaker’s
a. Hardware
b. Software
c. Device
Contents Setup Use Troubleshooting Status LED Appendix
39