Side 36
6.6 Adjusting neck pillow
e neck pillow hangs loosely over
the backrest, guided by a cloth guard
on the back. is, combined with
counterweight, ensures that the pillow
stays in place when placed in the
desired position.
If you choose to use only the lower part
of the back, your pillow can be moved
down.
6.5 Adjustment of the back
e upper part of the back can be used
to extend the back. Lift it up or press it
down as desired. It locks into stepped
groves on the pins. e upper part of
the back can also be angled. Bend it
back or forth until you find the position
that suits you.
If you want a shorter back, the upper
part can be completely pulled off.
UPPER BACK
Turn and pull to
desired postition
6.7 Adjusting leg support
e leg support is attached to a scissor
mechanism with two sliding rails. A
tension strap pulls in the foot pad
when the leg rest is pushed in. e leg
support grows in length when relea-
sed and detracts when returned to the
default position.
ENGLISH
To Next Page
Loading...