HEPRO User Manual | Side 35
6.3 Adjusting seat depth
e seat cushion is attached to the
seat plate with Velcro and is adjustable
in depth. e cushion is detachable and
can be moved to optimise comfort.
e seat plate is attached to the seat
frame with two bolts and associated
wing nuts. e seat plate has three
holes for regulation. By default, the
disc is attached to the center hole.
Combining the position of the seat
plate and seat cushion achieves the
optimal seat depth for the user.
6.4 Adjustment of seat
angle
By adjusting the wheel under the seat,
you can move the angle of the seat to
the desired position. ere is a wheel
on each side. Before operating the
wheel, the wing nuts securing the seat
plate must be loosened slightly and
then tightened again when the desired
position is reached.
To Next Page
Loading...