Need help?Do you have a question about the Heraeus Biofuge Primo R and is the answer not in the manual?
General| Type | Centrifuge |
|---|---|
| Max Speed | 15, 000 RPM |
| Max RCF | 21, 380 x g |
| Refrigeration | Yes |
| Timer | 0 - 99 minutes |
| Noise Level | <60 dB |
| Power Requirements | 230V, 50/60 Hz |
Covers proper use, improper use, and hazardous material handling.
Instructions for rotor installation, lid operation, and component condition.
Details on conformity to standards and safety symbols in the manual.
Description of built-in safety features of the centrifuge.
Key features and performance characteristics of the Biofuge primo R.
List of components included with the centrifuge.
Procedures for safely moving and setting up the centrifuge.
Criteria for selecting an appropriate installation site.
Steps for aligning the centrifuge after relocation.
Instructions for connecting the centrifuge to the power supply.
Procedure for powering on the centrifuge and initial display checks.
How to open and close the centrifuge lid safely.
Temperature limits for operating specific rotors.
Factors affecting rotor lifespan and safety warnings.
Guidelines and warnings regarding rotor overloading.
Best practices for filling tubes to ensure proper separation and balance.
Specific loading requirements for rotors 7590 and 7595.
Guidelines for loading samples for aerosol-tight runs.
Selecting braking profiles and switching between speed and RCF displays.
Procedure for setting the desired rotational speed.
How to input and set the Relative Centrifugal Force (RCF).
Explanation of RCF calculation and factors affecting it.
How to set fixed run times or enable continuous operation.
Steps to initiate a centrifugation run.
How the centrifuge handles and indicates rotor unbalance.
Procedure for modifying parameters while the centrifuge is operating.
Methods for stopping the centrifuge with preset or continuous time.
How temperature is maintained when the centrifuge is not running.
Using the 'quick run' function for short sample processing.
Step-by-step guide for safely removing the rotor.
Cleaning and disinfection responsibilities for the user.
Guidelines for cleaning the centrifuge and its accessories.
Precautions for using hypochlorite solutions for disinfection.
Guidelines and limitations for autoclaving rotors and adapters.
Information on recommended annual servicing by authorized personnel.
Terms and conditions for the centrifuge warranty.
List of standards the centrifuge conforms to.
Details on voltage, frequency, and fuse protection.
To Next Page
