Need help?Do you have a question about the Heraeus HS 18 and is the answer not in the manual?
Crucial safety guidelines for repairs and inspections, emphasizing hazard prevention and proper procedures.
Catalog of mechanical spare parts with order numbers and corresponding service instruction references.
Comprehensive list of mechanical and electronic spare parts, including order numbers and references.
Detailed steps for the safe removal and installation of the exhaust filter.
Procedure for removing and installing the blower unit.
Procedure for verifying electrical safety, including leakage, ground resistance, and polarity tests.
Method for testing the safety cabinet housing for leaks using pressure and leak detection foam.
Procedure for testing the integrity of HEPA filters and their housings using an aerosol photometer.
General| Maximum Speed | 1500 rpm |
|---|---|
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Type | Hotplate Stirrer |
| Stirring Speed | 150-1500 rpm |
| Plate Size | 180 mm |
To Next Page