In HOTCUE mode
ADD a HotCue at the current playhead position by
pressing a pad.
The pad lights up in red when a HotCue is defined.
Press a pad to position the playhead at the
corresponding HotCue.
To delete a HotCue, press SHIFT + a pad.
ADD or DELETE up to 4 HOTCUES on the fly.
In ROLL mode
Pad 1 enables a temporary loop of 1/16 of a beat.
Pad 2 enables a temporary loop of 1/8 of a beat.
Pad 3 enables a temporary loop of 1/4 of a beat.
Pad 4 enables a temporary loop of 1/2 of a beat.
The track continues to play in the background and when
you exit the loop/let go of the pad, you continue the
playback of the track without having lost the rhythm and
the phrasing.
In _FX mode (long press)
Pad 1 enables an automatic transition with the
FadeToGrey effect.
Pad 2 enables an automatic transition with the
TransDelay effect.
Pad 3 enables the Flanger effect.
Pad 4 simulates a Baby Scratch.
In _SAMPLER mode (long press)
The pads let you play the 4 samples found on the first
line of the multilayer sampler in DJUCED
®
.
Pad not lit up = no sample is being played.
Pad lit up = the sample is being played.
SHIFT + pad = stop the sample being played.
To Next Page
Loading...
