Hercules DJCONTROL INPULSE 200 User Manual

By default, each time your product is connected, the headphones output is
assigned to output 3-4 so that it can work with all DJing software available
on the market — including DJUCED

, in particular.
However, if you wish to use your product’s headphones output to listen to
music on your computer using iTunes, for example, you must route output
1-2 to the headphones output. To do this, press the Master button.
5.3. Compatibility
1. USB Audio / USB MIDI
This product is plug and play and can work without drivers on any PC or
Mac, as it complies with the USB Audio and USB MIDI standards.
2. ASIO
ASIO drivers are available from the product page on the Hercules support
website, if required by a software application or if you wish to benefit from
lower latency on your PC. The Hercules ASIO drivers include a control
panel accessible via the corresponding icon in the taskbar on a PC, or in
the application\Hercules\DJControl Inpulse 200 directory on a Mac.

Hercules DJCONTROL INPULSE 200 Specifications

General

USB port	Yes
Apple docking	-
Master (L, R) out	1
Headphone connectivity	3.5 mm
Platter size	3.5 \
Product color	Black
Built-in optical drive	No
Number of scratcher platters	2
Minimum RAM	4 GB
Minimum processor	Core 2 Duo
Mac operating systems supported	Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.2 Jaguar, Mac OS X 10.3 Panther, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Windows operating systems supported	Windows 10, Windows 7, Windows 8
Cables included	USB

Weight and Dimensions

Depth	195 mm
Width	320 mm
Height	49 mm
Weight	900 g