Page 3For technical questions, please call 1-888-866-5797.Item 57735
13. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
Power Tool Use and Care
1. Do not force the power tool. Use the
correct power tool for your application.
7KHFRUUHFWSRZHUWRROZLOOGRWKHMREEHWWHUDQG
VDIHUDWWKHUDWHIRUZKLFKLWZDVGHVLJQHG
2. Do not use the power tool if the switch
does not turn it on and off. $Q\SRZHUWRRO
that cannot be controlled with the switch
LVGDQJHURXVDQGPXVWEHUHSDLUHG
3. Disconnect the plug from the power source
and/or remove the battery pack, if detachable,
from the power tool before making any
adjustments, changing accessories, or storing
power tools. 6XFKSUHYHQWLYHVDIHW\PHDVXUHV
UHGXFHWKHULVNRIVWDUWLQJWKHSRZHUWRRODFFLGHQWDOO\
4. Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool. Power tools are
GDQJHURXVLQWKHKDQGVRIXQWUDLQHGXVHUV
5. Maintain power tools and accessories.
Check for misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power tool’s
operation. If damaged, have the power tool
repaired before use. Many accidents are
FDXVHGE\SRRUO\PDLQWDLQHGSRZHUWRROV
6. Keep cutting tools sharp and clean. 3URSHUO\
PDLQWDLQHGFXWWLQJWRROVZLWKVKDUSFXWWLQJHGJHV
are less likely to bind and are easier to control.
7. Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
SRZHUWRROIRURSHUDWLRQVGLIIHUHQWIURPWKRVH
LQWHQGHGFRXOGUHVXOWLQDKD]DUGRXVVLWXDWLRQ
8. Keep handles and grasping surfaces dry, clean
and free from oil and grease. 6OLSSHU\KDQGOHV
DQGJUDVSLQJVXUIDFHVGRQRWDOORZIRUVDIHKDQGOLQJ
DQGFRQWURORIWKHWRROLQXQH[SHFWHGVLWXDWLRQV
Battery Tool Use and Care
1. Recharge only with the charger specified by
the manufacturer. $FKDUJHUWKDWLVVXLWDEOH
IRURQHW\SHRIEDWWHU\SDFNPD\FUHDWHDULVN
RIILUHZKHQXVHGZLWKDQRWKHUEDWWHU\SDFN
2. Use power tools only with specifically
designated battery packs. Use of any other
EDWWHU\SDFNVPD\FUHDWHDULVNRILQMXU\DQGILUH
3. When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from
one terminal to another. 6KRUWLQJWKHEDWWHU\
WHUPLQDOVWRJHWKHUPD\FDXVHEXUQVRUDILUH
4. Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
VHHNPHGLFDOKHOSLiquid ejected from the
battery may cause irritation or burns.
5. Prevent unintentional starting. Ensure the
VZLWFKLVLQWKHRIISRVLWLRQEHIRUHFRQQHFWLQJ
WREDWWHU\SDFNSLFNLQJXSRUFDUU\LQJWKH
SRZHUWRRO&DUU\LQJWKHSRZHUWRROZLWK\RXU
ILQJHURQWKHVZLWFKRUHQHUJL]LQJSRZHUWRRO
that have the switch on invites accidents.
6. Disconnect the battery pack from the
power tool before making any adjustments,
changing accessories, or storing power tool.
6XFKSUHYHQWLYHVDIHW\PHDVXUHVUHGXFHWKH
ULVNRIVWDUWLQJWKHSRZHUWRRODFFLGHQWDOO\
7. Do not use a battery pack or power tool that
is damaged or modified. 'DPDJHGRUPRGLILHG
EDWWHULHVPD\H[KLELWXQSUHGLFWDEOHEHKDYLRU
UHVXOWLQJLQILUHH[SORVLRQRUULVNRILQMXU\
8. Do not expose a battery pack or power tool to
fire or excessive temperature. ([SRVXUHWRILUHRU
WHPSHUDWXUHDERYH)PD\FDXVHH[SORVLRQ
9. Follow all charging instructions and do
not charge the battery pack or power tool
outside of the temperature range specified
in the instructions. &KDUJLQJLPSURSHUO\RUDW
WHPSHUDWXUHVRXWVLGHRIWKHVSHFLILHGUDQJHPD\
GDPDJHWKHEDWWHU\DQGLQFUHDVHWKHULVNRIILUH
10. Have servicing performed by a qualified
repair person using only identical
replacement parts. This will ensure that
WKHVDIHW\RIWKHSURGXFWLVPDLQWDLQHG
11. Do not modify or attempt to repair the power
tool or the battery pack except as indicated
in the instructions for use and care.
12. The battery Charger gets hot during use.
The Charger’s heat can build up to unsafe
levels and create a fire hazard if it does
not receive adequate ventilation, due to
an electrical fault, or if it is used in a hot environment.
Do not place the Charger on a flammable surface.
Do not obstruct any vents on the Charger.
Especially avoid placing the Charger on carpets
and rugs; they are not only flammable, but they
also obstruct vents under the Charger. Place the
Charger on a stable, solid, nonflammable surface
(such as a stable metal workbench or concrete floor)
at least 1 foot away from all flammable objects, such
as drapes or walls. Keep a fire extinguisher and a
smoke detector in the area. Frequently monitor the
Charger and Battery Pack while charging.