Page 7For technical questions, please call 1-888-866-5797.Item 57735
WARNING marking concerning
Risk of Explosion.
Do not puncture, short, or open
battery packs and do not charge
damaged battery packs.
WARNING marking concerning
Risk of Electric Shock.
Properly connect Charger’s power
cord to appropriate outlet.
SPECIFICATIONS
Battery
57367 Hercules 12V Li-ion
(sold separately)
Charger
56561 Hercules 12V Li-ion
(sold separately)
No Load Speed ±PLQPLQ
Spindle Thread 5/16"
Max. Accessory
Diameter
Polishing 3" (76mm)
Sanding 2"
(
mm
)
SETUP –ࣰ%()25(86(
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section at the
beginning of this manual including
all text under subheadings therein
before set up or use of this product.
Charging
Charge battery pack after unpackaing and before using
this tool. Follow instructions included with battery
charger (battry pack and charger sold separately).
Functional Description
1. Spindle Lock
2. Spindle
3. Trigger
4. Trigger Lock
5. Speed Switch
Assembly
TO PREVENT SERIOUS INJURY:
Do not operate this tool with one hand only or
without the Auxiliary Handle properly installed.
Auxiliary Handle
1. The Auxiliary Handle may be installed
on either side of the Gear Housing.
2. Screw the threaded end of the
Auxiliary Handle into the selected position.
Tighten securely before beginning work.
2
1
3
4
5
To Next Page
Loading...